|
|
Post by thecrimsonchinh on Jan 14, 2016 14:45:15 GMT
I just received my order from robotdigg and they taped down the heated bed onto a sheet of cardboard to ship it. After removing the tape, a lot of tape residue was left on there. What's the safest way to remove this from the heated bed?
|
|
|
|
Post by macgyver03 on Jan 14, 2016 17:26:58 GMT
The easy answer is isopropyl alcohol which is safe for the PCB and aluminum. The best answer if its just on the aluminum is to carefully use acetone on the aluminum being careful not to get it on the PCB. A little won't hurt long term, but its safest to put it on a cloth and then wipe down the surface carefully.
|
|
|
|
Post by thecrimsonchinh on Jan 14, 2016 23:35:40 GMT
I'll try the alcohol since the residue isn't on the aluminum side. Thanks for the response.
|
|
|
|
Post by dkrockville on Jan 15, 2016 17:22:12 GMT
Same issue with residue. Alcohol worked for me. RobotDigg taped directly to the bed instead of wrapping and then taping over it.
|
|
