|
Post by np23 on Oct 23, 2015 0:20:45 GMT
Hey guys,
My stepper motors work fine, but they make some noise while they are running. Is that normal or should there be no noise at all?
Thanks
|
|
|
Post by 3DprintedLife on Oct 23, 2015 1:26:38 GMT
This is normal, the stepper drivers will make a quiet buzz whenever the motors are powered. The motors will probably make some noise too. This is perfectly normal, unfortunately completely silent motors and drivers aren't a thing yet! If the noise is loud or sounds unhealthy (grinding/stuttering/skipping) then that may indicate a bigger problem is at hand.
|
|