|
Post by jjlink on Sept 8, 2017 19:29:10 GMT
This End-stop won't engage with the new Hiwin Rails due to the size difference. I can kluge something up, however maybe a 3d printed part would be better. 36919747636_140d3b9696_z by John Link, on Flickr
|
|
|
Post by 3DprintedLife on Sept 9, 2017 19:09:52 GMT
Whoops sorry about that, I'll modify the endstop bracket design and get a new one uploaded tonight. I'll notify all who purchased the printer about the new part. For now, you can probably get away with either not using the endstop, or just gluing a small plastic cube or other thing onto the bearing so it triggers the endstop.
|
|
|
Post by 3DprintedLife on Sept 10, 2017 15:30:01 GMT
Sorry this is a little late! I have attached the updated STL file, as well as the source Autodesk Inventor file and a step file so anyone who wishes to further modify the part may do so. TO FUTURE READERS Please note the date of this forum post. The files posted here may be out of date. For the most up to date files, please see www.eclips3d.com/docs.html
|
|