bpopilek
Junior Member
Wax on, Wax off...
Posts: 95 
|
Post by bpopilek on Dec 8, 2016 3:24:07 GMT
I got part of the printer wired up tonight and wanted to test the LED lighting. I plugged it in, flipped the switch, and nothing happened. I checked the power supply and the green LED is not lighting up. I then grabbed my multimeter and verified I have 120v to the PSU. The switch is working and lights up as well. What do I do now?
|
|
bpopilek
Junior Member
Wax on, Wax off...
Posts: 95
|
Post by bpopilek on Dec 8, 2016 3:36:26 GMT
Nm! I pulled the PSU out and found that mine had been sent from the factory with the 120/230v switch in the wrong position! It's working now with it on the right selection!
|
|
|
|
Post by dkrockville on Dec 9, 2016 3:34:09 GMT
Thanks for the hint. Mine was also factory set to 230v.
|
|
