|
Post by 3DprintedLife on Dec 10, 2016 19:06:33 GMT
Just checked the last y gantry piece of the beta run that I have and sure enough the tap is the wrong thread. It appears to be a finer pitch M5 thread, so that would explain why it starts to hold and then gets tough to turn before stripping out. Doh! Anyway like you guys mentioned you can just strip out the hole with the bolt then get a longer bolt and nut to put on the other end. I do apologize about this and if anyone would like to be reimbursed for getting the longer bolt and nut I'd be happy to do so. -Andrew
|
|