afi
New Member
Posts: 3
|
Post by afi on Oct 19, 2016 4:00:36 GMT
I upgraded my ThreeUp to the Eclips3D. I used the old motors and not the ones on the BOM. I was wondering if someone knew what the specs were on those motors. I know they are Nema 17s but I do not know their amperage.
|
|
|
Post by 3DprintedLife on Oct 19, 2016 14:08:56 GMT
Can't say anything for sure but if you measure the motors and they are 40mm long then go with 1.2A! If the motors or drivers get too hot you can always turn it down.
|
|