|
|
Post by codyb4175 on Sept 18, 2016 14:05:13 GMT
What settings for abs do ya'll suggest?  |
|
|
|
Post by 3DprintedLife on Sept 18, 2016 15:33:56 GMT
Hooray warping! Jk yuck! Bed at around 100C with buildtak, nozzle at 240, turn off part cooling fan, and make sure your printer is in a not too cold and not too drafty room!
|
|
|
|
Post by codyb4175 on Sept 18, 2016 16:17:48 GMT
Thanks Andrew, I'll try upping my nozzle temp to 240 the highest I've tried so far is 230.
Thought I had included my current settings, must have been a phone mistake. My best prints were with buildtak at 100C, nozzle at 220C with no part fan.
Hopefully I'll get to do some more testing today.
|
|
|
|
Post by 3DprintedLife on Sept 18, 2016 16:48:30 GMT
Also try cleaning your buildtak with 70% ipa when it is cool, that may help!!
|
|
|
|
Post by codyb4175 on Sept 18, 2016 20:20:20 GMT
Thanks Andrew Nozzle temp - 245C Bed temp - 90C (dropped to reduce elephant foot)  |
|
|
|
Post by 3DprintedLife on Sept 18, 2016 20:42:57 GMT
Looks very good, nice job!!
|
|
