|
Post by octocom on May 20, 2016 18:24:49 GMT
Hi Guys,
Can you recommended any good guides for Inventor pro, i'm trying to increase the build height, but trying to understand how to get all the attached items to move position in relation to the extra height frame etc
Octocom
|
|
|
Post by bschafer on May 24, 2016 1:44:43 GMT
Octocom
As I see it, extending the printer height doesn't require much.
Ypu just need to replace the lead screw with a longer one along with the 2 vertical rods so your hot bed can move a greater distance up and down. The only thing else,needing replacement are the 4 corner vertical extrusions which need to be also replaced with longer ones. I don't see anything else needs to be changed' as long as your wiring can handle the extra travel.
What is it that is an issue for you? or am I not seeing something
|
|
|
Post by scottadams on May 24, 2016 19:28:32 GMT
I was able to add 60mm of z height by just buying the four vertical extrusion pieces as 500mm and moving some other parts around. It's not as pretty as what stock would be, but it works for me. I'm a few mm beyond what the z lead screw should probably be since at the top of travel the rod doesn't fill the lead screw, but I haven't noticed any ill effects. I don't know of any good guides for Inventor.
|
|