carlos
Junior Member
Posts: 94
|
Post by carlos on Mar 25, 2016 4:24:35 GMT
Figured I'd list this here since it's useful to know. Using the reprap calculator prusaprinters.org/calculator/ I got the Optimal layer height for our Z axis Layer height on the eclips3d. Layer heights: 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
|
|
|
Post by rock75 on Mar 25, 2016 16:44:00 GMT
Great info! Thanks Carlos!
|
|
carlos
Junior Member
Posts: 94
|
Post by carlos on Mar 25, 2016 17:37:35 GMT
This should squeeze out some excellent prints.
|
|