|
Post by travistrue on Mar 7, 2016 16:04:25 GMT
Hey guys, if anyone's looking for a cheaper alternative LCD screen, then you might want to consider the "LCD 12864 Graphic Smart Display Controller". I happened to have one lying around from a previous project, and it looks like the Azteeg's got EXP1 and EXP2 connectors on it. It's just a matter of getting cables with a smaller 2x4 dupont connector block to support it.
|
|
|
Post by 3DprintedLife on Mar 7, 2016 23:09:39 GMT
|
|
Rick
Junior Member
Posts: 75
|
Post by Rick on Mar 9, 2016 4:17:05 GMT
Problem is that they no longer have stock on the adapter clips, and they only work on the Rev 1.1 Azteeg boards.
|
|
|
Post by travistrue on Mar 10, 2016 0:51:45 GMT
I checked out the thread, and it looks like bpopilek beat me to the punch. He even provided STL files for the enclosure, so that saves me design time in OpenSCAD. Problem is that they no longer have stock on the adapter clips, and they only work on the Rev 1.1 Azteeg boards. I didn't know that, but that's really good to know considering I have a v2.0 board, thus making the connector mentioned in the link above incompatible for my hardware configuration. I actually bought dupont-like 2x5 bridge connectors off Amazon before seeing Andrew's link to the post above. Here's the link: www.amazon.com/gp/product/B00R1LKZOMI previously contemplated on getting that connector even after ordering the bridge, but it was $10, and out of stock, as mentioned.
|
|