mtk
New Member
Posts: 1
|
Post by mtk on Feb 14, 2016 16:59:27 GMT
Hi,
Is it possible to print via SD card only with Azeeq X5 V1.1?
|
|
|
Post by 3DprintedLife on Feb 15, 2016 2:58:39 GMT
Yep! You just need to have .g files (.gcode I don't believe work). Put them on the sd card with your firmware and config file and you should be able to find them in a program like repetier host to initialize the print!
|
|